Markets
Mobile water solutions for changing industrial conditions
Across industrial sectors, mobile treatment capacity must fit within the operating realities of each site.
Process requirements, utility specifications, discharge conditions and applicable regulations define the required treatment outcome. Existing treatment infrastructure, connection points, site access, available space and operating schedules determine how mobile capacity is positioned and integrated within site operations.
Urgency and required service duration determine the mobilisation and delivery approach.
Integrate mobile systems into industrial operations
Download
Industrial water and wastewater priorities by sector
Power Generation
Power plants rely on distinct water treatment circuits, each with its own water quality and continuity requirements. Boiler make-up treatment and condensate polishing maintain the water quality required by the steam cycle; cooling water treatment controls fouling, scaling and corrosion; wastewater treatment supports discharge and reuse requirements.
Mobile Water Solutions provides mobile treatment capacity when start-up and shutdown increase demand, changes in source water quality alter the treatment duty, or planned outages, refurbishment, or water treatment plant failure take existing systems out of service.
Oil & Gas
Refineries and downstream oil and gas sites depend on treated water for steam, cooling and process duties, and on reliable wastewater treatment before discharge or reuse. Turnarounds, major maintenance, freshwater constraints and discharge limits can leave the site without sufficient utility water or wastewater treatment capacity.
Mobile Water Solutions adds capacity or temporarily replaces affected treatment stages for demineralised water production, wastewater treatment and water reuse when permanent systems are unavailable or cannot meet the required flow or water quality.
Petrochemical
Petrochemical production places continuous and changing demands on utility water and wastewater systems. A demineralisation fault, a change in raw water quality or increased production demand can leave the existing treatment system unable to deliver the water quality or flow rate required for steam generation and process water applications. Changes in effluent load or composition can also exceed existing wastewater treatment capacity and restrict discharge or reuse.
Mobile Water Solutions provides mobile treatment capacity that can supplement or temporarily replace existing systems for demineralised water production, wastewater treatment and water reuse, configured around the affected system, required treatment outcome and operating timeframe.
Food & Beverage
Water demand in food and beverage plants spans production, cleaning and utility systems, while wastewater volume and composition can vary with product mix, cleaning cycles, production schedules and seasonal demand. New production lines and peak periods can increase treated water demand and wastewater loads beyond existing treatment capacity.
Mobile Water Solutions can provide process water and boiler feedwater treatment, wastewater treatment and, where technically viable, water reuse. Mobile systems can supplement or temporarily replace affected treatment stages and support pilot testing. The service is configured around the water source or effluent characteristics, required outlet quality, flow rate, discharge or reuse requirement and operating timeframe.
Pulp and Paper
Pulp and paper production requires consistent water quality and flow across steam generation, pulping, bleaching, paper production and cooling. Disruption to boiler feedwater supply, demineralisation failures, deterioration in river water quality or elevated chloride levels in process water circuits can leave existing treatment unable to meet process and utility requirements. Wastewater volume or composition can also place pressure on treatment capacity before discharge or reuse.
Mobile Water Solutions can restore or supplement boiler feedwater, process water and cooling water capacity, and cover temporary wastewater treatment or reuse requirements. The service is configured around water or wastewater characteristics, required outlet quality, flow rate and operating timeframe.
Automotive
Automotive manufacturing uses treated water for component washing, surface treatment, cooling and utility systems, while painting, coating and machining operations generate wastewater with different treatment requirements. Equipment failure, changes in raw water quality, planned refurbishment or temporary capacity needs can leave existing water or wastewater treatment unable to meet water quality, flow or treatment capacity requirements.
Mobile Water Solutions provides mobile treatment capacity for process water and wastewater applications. Mobile systems can maintain demineralised water supply, add capacity or temporarily replace affected treatment stages. The configuration is based on the required water quality, the required wastewater discharge or reuse outcome, flow rate, site infrastructure and operating timeframe.
Engineering Houses & EPCs
Engineering houses and EPC contractors may require temporary treated water capacity during pre-commissioning, commissioning and plant start-up, before permanent treatment systems are fully available or operating at design capacity. Activities such as steam blowing, system flushing and equipment cleaning can create defined short-term water quality and flow requirements that must be aligned with the commissioning programme.
Mobile Water Solutions provides mobile demineralised water production, filtration, pumping and storage capacity configured around project milestones, site interfaces and the required treatment outcome. Mobile systems can support individual commissioning activities or operate as an integrated temporary treatment train until the permanent plant is ready for operation.
Metals
Steel and metals production uses treated water for cooling, quenching, cleaning, surface treatment and utility systems, while process effluent requires treatment before discharge or reuse. Contamination of process water sources, condensate losses or failure of wastewater treatment equipment can create gaps in demineralised water supply or effluent treatment capacity.
Mobile Water Solutions deploys the treatment assets needed to re-establish demineralised or process water supply and maintain effluent polishing while fixed systems are constrained or unavailable. The configuration is matched to the source water or effluent, required outlet quality and flow, and the site’s existing infrastructure.
Mining
Mining operations manage water across extraction and ore processing, from process water supply to tailings water management and effluent treatment. Variable flows and contaminant loads, including suspended solids, oils and heavy metals, can exceed existing treatment capacity or affect the site’s ability to meet discharge limits or reuse requirements.
Mobile Water Solutions configures and deploys treatment assets to produce process water or treat mine water and process effluent when fixed systems are overloaded, constrained or unavailable. The treatment approach is defined by the water source or contaminants present, required outlet quality, flow rate and site operating conditions.
Pharmaceutical
Pharmaceutical manufacturing requires purified water to defined chemical and microbiological specifications for production, cleaning and other quality-critical operations. Increased production demand, maintenance or reduced reliability in fixed purification systems can leave the site without sufficient capacity to meet the required water quality or flow.
Mobile Water Solutions integrates mobile purified water systems with existing production and distribution infrastructure to add capacity, provide standby cover or maintain supply while fixed purification systems are constrained or unavailable. The service is defined around the required water quality specification, flow rate, connection points, applicable validation requirements and operating timeframe.
Define your industrial treatment requirement
Talk to an expert